Thursday, December 13, 2018

Three Things David Pye's "The Nature and Art of Workmanship" Is Not About


Gouge cut detail, jack plane.

Recently Christopher Schwarz wrote a pair of posts on David Pye, the influential designer, critic, and woodworker who coined the phrase “workmanship of risk.” Chris’s take is as controversial and thought provoking as you’d expect, and it’s motivated me to write down some of my own thoughts on Pye. Like Chris, I first read Pye's book (The Nature and Art of Workmanship, published in 1968) years ago, and I've returned to it many times since.

I’m not here to argue with Chris, a terrific writer who has done more for the craft of woodworking than, well, just about anyone. But I’d like to try and rehabilitate Pye’s ideas from decades of misuse and misunderstanding. As Chris himself says, people love to take Pye’s pet phrase out of context and use it in ways that would've horrified him. So let's start by examining three common misconceptions about Pye's writing.

It’s Not about Screwing Up

Pye’s definition of workmanship of risk is pretty well known: It is workmanship in which “the quality  of the result is not predetermined, but depends on the judgment, dexterity, and care which the maker exercises as he works. The essential idea is that the quality of the result is continually at risk during the process of making.” 
This passage, with its connotations of daredevil craftsmanship, is very suggestive, but it’s only part of the story. Pye valued workmanship of risk for its "diversity," a catch-all term he used to convey qualities such as variety, uniqueness, and subtlety.

Consider the gouge cut in the photo above. I make these cuts freehand, so each one is a little different. The surface varies subtly from the surrounding areas that were planed, scraped, or chiseled. And yes, there is risk of failure: Sometimes the cuts are great, more often they’re decent, occasionally they’re barely acceptable. But I think what Pye would've appreciated about them was not the possibility of failure, but the fact that the surface bears traces of having been worked by an actual human being. Risk is a means, not the end: "There is much more in workmanship than not spoiling the job, just as there is much more in music than playing the right notes."

If the phrase “workmanship of risk “ is poorly understood, then its corollary, the "workmanship of certainty," is even more so. Pye starts by noting that the workmanship of certainty is “always to be found in quantity production, and found in its pure state in full automation. In workmanship of this sort, the quality of the result is exactly predetermined before a single salable thing is made.” To illustrate this concept, Pye contrasts the act of writing with a pen, clearly the workmanship of risk, with the operation of a printing press. He notes that while it took a great deal of skill to create the metal typeface and machinery necessary for printing,

But all this judgment, dexterity, and care has been stored up before the actual printing starts.  Once it does start, the stored up capital is drawn upon and the newspapers come pouring out in an absolutely predetermined form with no possibility of variation between them.

This passage is frequently misinterpreted by Pye’s critics, who object on the grounds that printing presses or other machinery may take great skill to operate. But Pye's point is not that it’s easy to run a printing press, or that nothing can go wrong with machinery. He’s simply observing that all the  copies of today’s newspaper that come out of the press will look the same. A skilled operator may be able to keep the machinery running more smoothly, and he may have fewer mangled copies of the paper that end up in the dumpster. But his copies of the paper will look the same as those of a less skilled operator, just as all the copies of an IKEA table will look pretty much the same, regardless of whether Sven or Birgit was running the machinery that day. It’s not the certainty of never screwing up that Pye is talking about; its the certainty that the objects of mass production will lack any meaningful variation.

At some point you might be wondering, doesn’t this risk/certainty thing just boil down to hand made vs. machine made? That is certainly the message many have taken from Pye, but as we will see, nothing could be further from the truth.


It's Not about Hand Tools

When someone uses the phrase "workmanship of risk" in a woodworking blog, it's often to extol the virtues of, say, cutting to a line with a hand saw, rather than feeding the board to a table saw. The former obviously requires more skill, and the risk of cutting poorly may be higher, but the broader implication is that hand tools in general are the workmanship of risk, while power tools are the dull, plodding workmanship of certainty. This is the framing that Chris Schwarz objects to, and rightly so.

But Pye actually takes the opposite tack. He begins the chapter "Is anything done by hand?" with two contrasting examples: A dentist drilling into a tooth with a handheld power drill, and a workman operating a hand-cranked drill press (like a post drill). The obvious point here is that the machine operation is full of risk, while the hand tool operation has very little (Pye amusingly notes that it has perhaps 5% risk because "if the hand-workman is fool enough he may break the drill"). The purpose of these examples, says Pye, is to show that "to distinguish between the various ways of carrying out an operation by classifying them as hand or machine work is…all but meaningless."

See, the whole reason Pye resorted to the categories of risk and certainty is that he wanted to avoid the dichotomy of hand vs. machine made. Pye sees "hand made" as a historical term people use to describe pre-Industrial production, but it's a highly inaccurate term, since many trades have actually used machines, more broadly defined, for centuries. Think of the loom, the lathe, or the potter's wheel.

Ultimately, Pye's purpose was to distinguish between highly automated mass production on the one hand, and the individual craftsman or small shop on the other.  "Workmanship of risk" was a useful way of describing what the individual craftsman did, regardless of whether that involved hand tools, power tools, or (more likely) both.

It's Not About Your Table Saw

After reading Pye's example of the drill-wielding dentist, one might conclude that cutting to a line with a band saw, which involves a modest amount of skill, is workmanship of risk, while ripping a board on a table saw, which requires little, is workmanship of certainty. Or, to cite another example, cross-cutting exactly to the line with a back saw vs. squaring up the work on a shooting board.

Nope, says Pye. "All workmen using the workmanship of risk are constantly devising ways to limit the risk by using things such as jigs and templates. If you want to draw a straight line with your pen, you do not go at it freehand, but use a ruler, that is to say, a jig."

Pye is distinguishing here between individual operations that involve more or less risk, and an overall framework of risk or certainty. He continues:

In fact, the workmanship of risk in most trades is hardly ever seen, and has hardly ever been known, in a pure form, considering the ancient use of templates, jigs, machines, and other shape-determining systems, which reduce risk. Yet in principal the distinction between the two kinds of workmanship is clear, and turns on the question: "Is the result predetermined and unalterable once production begins?" (emphases mine)
 To put this in concrete terms: If you are making a cabinet in your shop, you are engaged in the workmanship of risk, because you have control over the quality of the result. It doesn't matter whether you are doing the work with handsaws, planes, and chisels, or with a table saw, power planer, and router table. The latter approach may take more steps to limit risk, but that's what craftsmen have always done within an overall framework of the workmanship of risk.

On the other hand, to take another example of Pye's, suppose your job is to feed raw steel rods to a machine that then "turns out hundreds of finished bolts without anyone having to look at it." Now you're engaged in workmanship of certainty, because as Pye just said, the result is "predetermined and unalterable once production begins." And remember, "predetermined and unalterable" doesn't mean that nothing can ever go wrong; it means rather that the worker has no direct control over the quality of the work.

Now, we could quibble with this; we could say that the machine operator must know when to change or sharpen the cutting tool, or the bolts will be ruined. But all this means is that a bit of skill and risk has been injected into the workmanship of certainty, just as those practicing the workmanship of risk are introducing a modicum of certainty by using templates and jigs. The categories of risk and certainty are extreme poles, and as Pye suggests are rarely seen in pure, unadulterated form. But even so, the distinction is clear: As a Supreme Court justice said of pornography, we know it when we see it.

Finding a Place for Crafsmanship

It's now fifty years since Pye wrote The Nature and Art of Workmanship, and much has changed. At the time, Pye was worried about the possibility that craft would disappear entirely, and that we'd be living in a world where all products were mass produced. So an important part of his philosophizing is about trying to find a place for craftsmanship in a world in which it seemed to be rapidly vanishing.

Pye wasn't a hopeless romantic or a Luddite, and he wasn't nostalgic for a bygone era. He didn't believe that workmanship of risk was better than workmanship of certainty: He points out, for example, that cars produced by workmanship of risk would be fantastically unaffordable by just about everyone. So he recognizes that the affordable mass production of consumer goods has enormous benefits, but at the same time he insists that traditional tradespeople (cabinetmakers, for example), practicing the workmanship of risk, produce things that have unique aesthetic qualities that the workmanship of certainty can never duplicate. He writes that the crafts "ought to provide the salt--and the pepper--to make the visible environment more palatable when nearly all of it will have been made by the workmanship of certainty."

Not everyone will agree with my interpretation of Pye, and that's OK. But having lived with his ideas in my head for a long time, I'll sum them up this way: Make stuff. Make it however you want, use whatever tools you want, limit risk to the extent that you need to. Skill is important, but "what matters most in workmanship is not long experience, but to have one's heart in the job and to insist on the extreme of professionalism."

8 comments:

  1. Thank you for this enjoyable (and long) read. Read the book only a few years ago and interpreted it similarly to you

    ReplyDelete
  2. Your comment "Chris, a terrific writer who has done more for the craft of woodworking than, well, just about anyone." set me back. Chris is more historian than woodworker, however not as charming and colorful as Roy Underhill. If you want to talk about woodworkers and authors who have done much for the craft look to the likes of Taig Frid, James Krenov,Ian Kirby, or Paul Sellers.

    ReplyDelete
    Replies
    1. The post is about Pye. I mentioned Chris only because he recently wrote about Pye as well. I think Chris's contribution to woodworking is clear, same for the folks you mention. I don't really want to argue about who's more important.

      Delete
  3. You never answer the question of why we value craftsmanship and risk-taking in craft. You seem to take it for granted. Is it purely a fetish for variation of surface? Is it a romance for the past? Is it a preference for the un-alienated labor of the worker? Or is a handmade thing more valuable because the risk involved makes it more rare (expensive to obtain) for the collector?
    There are always two perspectives: that of the worker and that of the collector. They are only occasionally the same in my view.

    ReplyDelete
    Replies
    1. Well, I didn't set out to answer the question of "why we value craftsmanship and risk-taking." That was well beyond the scope of my essay. Anybody who wants to write about that topic is welcome to.

      Delete
  4. I enjoyed reading your well-written essay, Steve. While the title was catchy and much referred to when my journey started in woodworking, I never picked it up, probably because there was stuff to build and deliver and philosophizing about it wasn't going to make much of a difference for me.

    ReplyDelete
    Replies
    1. Thanks for reading, Tico. It was good to see you at the LN show recently.

      Delete