Monday, October 9, 2017

New Article in Popular Woodworking


In this month's issue of Popular Woodworking, I have an article (my first!) on making a double iron coffin smoothing plane. Here's a link to a description of the article, and here's a link to purchase, should you be so inclined.


I didn't choose the title--Popular Woodworking likes puns more than the NY Post does!--but I'm very happy with how it all turned out. Megan Fitzpatrick originally asked me to write a seven-page article. A few months later, I emailed her to say "I have a problem. I've written 15 pages and I'm not done yet." But somehow, she managed to condense it down to 10 pages, without omitting any essential content.

I tried to put everything I could think of into this article, but after it was done, I realized there was one thing I didn't mention: no matter how complete an article is, it can never substitute for learning at the School of Hard Knocks. I tried to include everything I've learned over the past five years about avoiding all the pitfalls in planemaking, but you know what? The only way to really learn about those pitfalls is to experience them. You'll probably make some mistakes on your first plane. You might even have to start over. But if you want to make a plane, persevere, and you'll get there. I won't pretend it's easy, but it's not rocket science, either.

If anyone out there has comments or questions, feel free to post below.


2 comments:

  1. Hey, great article. This may be a naive question, but here goes. While your planes are beautiful is the functionality superior to a Krenov style plane. I made a Krenov jack plane and I'm happy with it. A smoother is next on the agenda. Your type of plane would be a great project but I'm a little intimidated by the process and tools required.

    Thanks,

    John

    ReplyDelete
  2. No doubt this is an excellent post I got a lot of knowledge after reading good luck. Theme of blog is excellent there is almost everything to read, Brilliant post. CutTheWood.com

    ReplyDelete